How To Flash ClockWorkMod Recovery On Samsung Galaxy Note 10.1 2014 Edition SM-P605
The Galaxy Note phablets/tablets are the high end devices from SAMSUNG with great features, capabilities, hardware and design. As we know SAMSUNG is trying their best to make a great device with greatest combinations. Here we came up with a new tablet launched some time before but it is the best device in the market and as compared to the previous one. This is Samsung Galaxy Note 10.1 2014 Edition, this tablet comes with 10.1 " of 2560x1600 pixels Display, 3 GB RAM, 16/32/64 GB Internal storage, 8 Megapixel Camera, 2.3 Ghz Quad Core CPU and 4.3 Android Jellybean.
Now it is the high end tablet in the market, it great design looks awesome with such internal features. Now adays people have PC with 2 GB RAM but yet this tablet comes with 3 GB RAM which will run more faster and smoother. Its back side is covered with a leather back which gives a soft premium feel as compared to hard polycarbonate.
Now adays the tablets are packed with low pixels camera which means tablets not supposed to be a great camera devices, now we are seeing this tablet comes with an 8 Megapixel camera which gives us such a high resolutions pictures and videos with awesome output. Also the led flash will help us take photos and videos in night with great brightness and low light.
Any how it was just the small review of the tablet, but we are not doing a full review we are flashing something here, we will now flash/install a custom recovery called ClockWorkMod recovery which will enable every user to install .zip package files, those package files includes apps, tweaks, mods, system apps, themes, ROMs etc. Get ready to Flash ClockWorkMod recovery on Samsung Galaxy Note 10.1 2014 Edition SM-P605
Before You Begin: (must do)
1. Drivers must be installed on your PC, to support your tablet in download mode, If you haven't install any drivers so go to : Samsung USB Drivers.
Downloads:
1. philz_touch_6.04.3-lt03ltexx.tar.md5 (SM-P605 Model)
2. philz_touch_6.25.8-lt03wifi.tar.md5 (SM-P600 Model)
3. philz_touch_6.25.8-lt03wifiue.tar.md5 (SM-P601 Model)
4. Odin3.zip
Installation:
1. Download the above both files.
2. Now extract the Odin and Open Odin app.
[this is Odin v3]
3. Now restart
your tablet in download mode by pressing and holding Volume Down + Power
Button at the same time for some time, don't leave the buttons until a
Warning Screen Appears. When Warning Screen appears just press Volume Up
Button to continue into download mode,
4. Now connect your tablet to PC, via USB cable,
5. Added!
message will be shown in message box of Odin app. That means the device
is properly connected, if not then try drivers installation
6. Now click On PDA and choose the philz_touch.......tar.md5 file. & then click Start button.
7. There will be a Pass message shown above which means the recovery is flashed correctly.
8. To go into
recovery mode, press and hold Power Button + Volume Button and dont
leave the buttons until the tablet reboots and Samsung logo appears,
then leave the power button and keep press Volume Up Button, the tablet
will boot in recovery mode.
Don't forget to share it.
រៀបចំដោយ facebook Oun Seyhacc
Skype : seyha roth
គណនី wing 00610827
Tel: 0979666687/098889568
បញ្ចាក់សុំទទួលខុសត្រូវដោយខ្លួនឯង
0 Responses So Far:
Post a Comment